To-do’s

This list is a brainstorming for me to collect my open todo’s:

  • Finalize Gauges – 2017+
  • Break Preassure Gauge – planned for 2018
  • document the current setup for future reference
  • Backlight MIP
  • Jumpseat in the cockpit

The following items are current active on my work list:

  • Shell Overhead closing with white fabric
  • finish the backlight of the overhead
  • Change to light grey overhead modules
  • Flaps and Pressurization Gauge change

The following items are already finished and working:

  • solution for SPK switch in the Audio Panel required (still searching) – to toggle audio output on headset and speaker or only headset – resolved 13.03.2011
  • lower Display unit (maybe a 10″ screen – preffered with touch) – completed August 2011
  • Pressurization panel – completed November 2011
  • ACARS printer – completed December 2011
  • Throttle – Feb 2012 – March 2012
  • ADF Module – April 2012
  • Simplify the SIOC scripts – May 2012
  • Paperless workflow – May 2012
  • Prepare Sound config for another machine (move to FMC machine) – May 2012
  • 2nd NAV Module – planned for 2013+ – August 2012
  • simplify the module connections for future transport – December 2012
  • Disassembling and moving the homecockpit – January 2013
  • Yaw Dumper Gauge – planned for 2015+ (will not be realized as of mid 2010 no Yaw Dumper Gauge is built into the real Boeing NGs)
  • Rebuild the whole sim and reactivate – December 2014
  • ATC Com via speakers in the overhead – December 2014
  • 1st Officer announiciators (inkl. 6-Pack) – January 2015
  • AFT Overhead panel – February 2015
  • APU Gauge – March 2015
  • Tiller – March 2015
  • Bodyshaker – August 2015
  • Interior – November 2015
  • Shell construction – April 2016
  • Visual System (180° with 2 projectors) – May 2016
  • Captains Yoke – October 2016
  • lower EICAS push buttons in MIP – November 2016
  • Captains Chrono – December 2016
  • Circuit breakers dummy – November 2016
  • Cockpit Seats finishing with gray fabric – February 2017